- Home>
- Fiber optic equipment>
- Discontinued -HDMI over Fiber Extender
Discontinued -HDMI over Fiber Extender
Extender requires RH-31 optical receiver and TH-31 optical transmitter.
HDMI can be transmitted up to 10km over single mode fiber.
The extender is a quality and economical solution designed for transmission of HDMI video with embedded audio over a single mode optical fiber cable. It can be used for importing unrestricted (No HDCP) HD content from any of HDMI video sources such as cameras, media players, PC, Videoservers etc. to long distance in big Studios, Airports, Supermarkets, Churchs, Security systems etc.
The transmitter module receives one HDMI signal and converts it to optical SDI signal. The receiver module receives the optical signal from input SC connector, and then converts it back to the electrical HDMI signal.
The TH-31 transmitter is a class 1 laser product.
Transmitter and Receiver has one additional SDI output for monitoring on SDI monitors or for any other purpose
Specifications:
Extending of HDMI signals over Fiber Optic in real time including embedded audio without delay
Supports: 1920x1080/50i, 1920x1080/59.94i,1280x720/59.94p, 720x576/50i, 720x480/59.94i
Embedded Audio (up to 16 Channels)
Status LED's
Compact size
Video Input
HDMI 1.3, EEDID
1920x1080/50i, 1920x1080/59.94i,
1280x720/59.94p, 720x576/50i, 720x480/59.94i
Audio Input
HDMI 1.3. EEDID
Linear PCM, 24bit/48kHz, up to 16ch
Fiber optic
Wavelength: 1550nm
Type: Single-mode
Optical power: Better than -7 dBm
Data rates: 1485 / 1483 / 270 /143Mbps
Optical connectors: SC
Video Output
HDMI 1.3, EEDID
1920x1080/50i, 1920x1080/59.94i,
1280x720/59.94p, 720x576/50i, 720x480/59.94i
Audio Output
HDMI 1.3. EEDID
Linear PCM, 24bit/48kHz, up to 16ch
Control
Vendor commands
DIP Switch + LEDs
Connectors
HDMI TYPE A (19 pin) x 1
SDI BNC x 2
POWER DC JACK 5.5mm x 1
Power Supply : 7-25VDC, 0,5A max, from DC Jack
Dimensions: (H x W x D): 110 x 60 x 25mm
Waight: 0,12kg
NOTE: Device use direct conversion with embedded audio.
Output mode equal input mode.
No scaling or frame rate conversion supported.